 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 SM16LC03C thru SM16LC24C TVSarrayTM Series TM DESCRIPTION (300 watt) This 16 pin 8 line Low Capacitance Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 300 watts for an 8/20 sec pulse and are designed to protect 3.0/3.3 volt components such as DRAM's, SRAM's, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. FEATURES * * * * Protects 3.0/3.3 up through 24V Components Protects 8 lines Bidirectional Provides electrically isolated protection SO-16 Packaging MECHANICAL * * * * * Molded SO-16 Surface Mount Weight: 0.128 grams (approximate) Body Marked with Logo, and device number Pin #1 defined by DOT on top of package Encapsulation meets UL 94V-0 MAXIMUM RATINGS * * * * Operating Temperatures: -550C to +1500C Storage Temperature: -550C to +1500C Peak Pulse Power: 300 Watts (8/20 sec, Figure 1) Pulse Repetition Rate: <.01% PACKAGING * * * Tape & Reel EIA Standard 481-1-A 13 inch reel 2,500 pieces (OPTIONAL) Carrier tubes 48 pcs per (STANDARD) ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS MAX SM16LC03C SM16LC05C SM16LC08C SM16LC12C SM16LC15C SM16LC24C MAA MAB MAF MAC MAD MAE 3.3 5.0 8.0 12 15 24 BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN 4 6 8.5 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 7.0 9.8 13.4 19 24 43 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 9.0 11 16.6 24 30 55 LEAKAGE CURREN T ID @ VWM A MAX 200 20 1 1 1 1 CAPACITANCE (f=1 MHz) @0V C pF TYP 25 25 25 25 25 25 TEMPERATURE COEFFICIENT OF VBR aVBR mV/C MAX -5 1 5 8 11 28 PART NUMBER DEVICE MARKING Part numbers with a "C" suffix are bidirectional devices NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. Application: The SM16CXXC product is designed for transient voltage suppression protection of components at the board level. It is an ideal product to be used for protection of I/O Transceivers. MSC0884.PDF ISO 9001 CERTIFIED REV M 7/07/2000 SM16LC03C thru SM16LC24C WAVE FORMS 100 Peak Value -- Ipp 8 X 20 Waveform 50 Half-Value -- Ipp 2 0 0 t 10 td 20 30 I t -- Time in microsec FIGURE 1 Peak Pulse Power Vs Pulse Time p FIGURE 2 Pulse Wave Form MOUNTING PAD SO-16 CIRCUIT DIAGRAM 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 SO-16 PACKAGE A INCHES DIM A MIN 0.358 0.150 0.053 0.011 0.016 0.050 BSC 0.006 0.004 0.189 0.228 0.010 0.008 0.206 0.244 0.15 0.10 4.80 5.79 MAX 0.398 0.158 0.069 0.021 0.050 MILLIMETERS MIN 9.09 3.81 1.35 0.28 0.41 1.27 BSC 0.25 0.20 5.23 6.19 MAX 10.10 4.01 1.75 0.53 1.27 B P B C D F G G D C K J J L K L P F MSC0884.PDF ISO 9001 CERTIFIED p REV M 7/07/2000 |
Price & Availability of SM16LC03C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |